CHT Products (24)
Filters
Applied Filters
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Primer Silcoset
Silicone Additives
Features:
Primer
Aerospace approved
For use with Silcoset 1 and 2 component elastomers
Good resistance to water immersion
Pink fluorescent dye for inspection aid
Color:
Pink
Primer OP2N-1
Silicone Additives
Features:
Primer
Suitable for use with CHT adhesives
Suitable for use with most plastics
Suitable for use with most natural and synthetic rubbers
Color:
Transparent
Primer No 6
Silicone Additives
Features:
Primer
Aerospace approved
Suitable for use with CHT adhesives
Suitable for non porous surfaces
For use with most metals
Color:
Pale Yellow
Primer No 3
Silicone Additives
Features:
Primer
For use with addition and condensation cure silicone elastomers
Adhesion to metals, rubbers, polyester and nylon
Suitable for non porous surfaces
Can be used as a protective barrier to prevent inhibition
Color:
Pale Yellow
TA2
Silicone Moulding Rubbers
Features:
Thixotroping Agent for Moulding Rubbers
Easy addition level
Rapid development of thixotropy
Suitable for vertical applications
Suitable for addition and condensation cure high tear strength (>15 N/mm) moulding rubbers
Color:
Colourless
MM CAT B5 NT
Silicone Moulding Rubbers
Features:
Catalyst
Blue colour
Standard cure speed
Color:
Blue
MM940
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
High tear strength
High dimensional stability
Chemically resistant to PU and PE
Fine detail pick up
Color:
Blue
SILSO FOOD 21931
Silicone Moulding Rubbers
Features:
2 Part Addition Cure Moulding Rubber
Crosslinks at temperatures >23°C
Easy processing
Crosslinks to a resistant, rubbery-elastic vulcanisate without reaction heat
Very good mechanical properties
Color:
Transparent
QM270
Silicone Moulding Rubbers
Features:
2 Part Mouldmaking Material
High durometer
Casting resin resistance
Fast de-mold time, excellent dimensional stability
Heat is required to achieve 70 shore A durometer
Color:
Beige
QM260
Silicone Moulding Rubbers
Features:
2 Part Mouldmaking Material
High durometer
Casting resin resistance
Fast de-mold time, excellent dimensional stability
FDA CFR 177.2600 compliant
Color:
Light Blue
MM928
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
High tear strength
High dimensional stability
Chemically resistant to PU and PE
Fine detail pick up
Color:
Blue
MM922
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
High tear strength
Good dimensional stability
Easily degassed
Fine detail pick up
Color:
Blue
MM918
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
High tear strength
Good dimensional stability
Easily degassed
Chemically resistant
Color:
Blue
SGM494
Silicone Grease
Features:
Silicone Grease
Work stable after 24 hours at 200°C/392°F
Non melting even in hot climates
Low bleed and weight loss
WRAS approved for potable water
Color:
Translucent
MM913
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
High tear strength
Flexibility for deep undercuts
High elongation
Easily degassed
Color:
Blue
MM906
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
High elongation
Easily degassed
Easy demoulding
Used for synthetic body parts
Color:
Blue
J24
Silicone Moulding Rubbers
Features:
2 Part RTV Silicone Moulding Rubber
For reproduction of models for scenery, restoration, fibrous plasterwork, model making and props
Cures at room temperature to a flexible 22-25 shore A material
Supplied with either F10 or S10 catalyst
Use with thisxotropic agent TA2 for application with brush or palette knife
Color:
MM730FG
Silicone Moulding Rubbers
Features:
2 Part Silicone Moulding Rubber
FDA CFR 177.2600 complaint for fatty and aqueous foods
EN 1186-1:2002 European overall migration in 10% v/v aqueous ethanol
Very low shrinkage
High dimensional stability
Color:
Beige
QLE 1102
Silicone Coatings
Features:
Addition Cure Specialty Silicone Coating
Fast cure at elevated temperatures
Low linear shrinkage
Transparent, ideal for pigmentation
Low viscosity and good inhibition resistance
Color:
Transparent and Colourless
ACC13
Silicone Coatings
Features:
Synthetic Peelable Mask
Neutral synthetic latex, ammonia free
Non corrosive to copper, gold or pre-soldered surfaces
Colour change from pink to red to indicate cure
RoHS compliant; contains no regulated compounds
Color:
Translucent Red
ACC15
Silicone Coatings
Features:
Silicone Conformal Coating
UL recognised in file no. E493561
Room temperature cure or mild heat acceleration at 60°C/140°F
Moderate viscosity, excellent adhesion
RoHS compliant; contains no regulated compounds
Color:
Translucent/Pale Yellow
SMG496W
Silicone Grease
Features:
Silicone Grease
Excellent work stability
Non melting even in hot climates
Opaque to white in colour
Excellent water repellence
Color:
Translucent to White
SGM496P
Silicone Grease
Features:
Silicone Grease
Excellent work stability
Non melting even in hot climates
Tinted pink for visual inspection aid
Excellent water repellence
Color:
Pink
SG500
Silicone Grease
Features:
Silicone Grease
Thermally conductive
Low volatility
Good dielectric and isolating properties
Low bleed even at elevated temperatures
Color:
White
Tufgel330
Silicone Encapsulants
Features:
2 Part High Strength Silicone Gel
Low modulus minimizes stress on parts and components
Inherent tack further enables mechanical adhesion
Potted or encapsulated assemblies can be repaired with modest effort
Chemical adhesion to many substrates with primer
Color:
Transparent and Colourless
SILSO COOL 21311
Silicone Encapsulants
Features:
2 Part Thermally Conductive Encapsulant
Flame retardant
High thermal conductivity
Low viscosity
Electrically insulating
Color:
Grey
Silcoset 105
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
UK MOD approved to DTD 900/4721 and AFS 1980
Flexible from -60°C/-76°F to +220°C/428°F
Aerospace approved
Good electrical isolation properties
Color:
White
SE3000
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
Thermally conductive
Low viscosity
Low thermal outgassing
UL94 V0 recognised in file no. E334038
Color:
Orange
Silcoset 101
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
UK MOD approved to DTD 900/4721 and AFS 1980
High temperature resistance
Aerospace approved Rolls Royce MSRR 9117
Ideal for low melt alloy casting
Color:
Red
SE2005
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
Low viscosity
Deep section cure
Excellent Dielectric properties
Protects against shock and vibration
Color:
White
SE2011
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
Adhesive at room temperature
Fast curing at room temperature
Low viscosity
UL recognised in file no. E334038
Color:
Black
QSil573
Silicone Encapsulants
Features:
Addition Cure Potting Silicone
No solvent added
Good thermal conductivity
24 hour room temperature
Repairable
Color:
Grey
SE2003
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
Thermally conductive
Non corrosive
Low thermal outgassing (ECSS-Q-ST-70-02C)
Resistant to reversion
Color:
Brick Red
QSil550
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
Long pot life
Low modulus and good elongation
275°C max working temperature, test method AFS1540B
UL94 V0 listed in file no. E205830
Color:
Grey
QSil553
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
100% solids - no solvents
Long pot life
Low modulus and good elongation
UL94 V0 listed in file no. E205830
Color:
Grey
QSil216
Silicone Encapsulants
Features:
2 Part Transparent Liquid Silicone Elastomer
Convenient 10:1 mixing ratio for use in automated dispensing equipment or hand mixing
Contains no solvents
Non-yellowing catalyst system
Chemical composition provides hydrolytic stability and reversion resistance
Color:
Transparent and Colourless
QSil12
Silicone Encapsulants
Features:
2 Part Encapsulation and Potting Silicone
Low viscosity
Variable cure speed with mild heat
Transparency, room temperature cure
Good adhesion with use of a primer
Color:
Clear, to slightly hazy yellow
SILSO BOND 13622
Silicone Adhesives
Features:
1 Part Low Corrosive Industrial Sealant
Excellent flow and self levelling properties
Low corrosion
Good adhesion to substrates
Color:
Black
EGel3000
Silicone Encapsulants
Features:
Silicone Gel
1:1 mix ratio
Very low viscosity
Soft but resilient gel
Flexible down to -55°C/-67°F
Color:
Transparent
SILSO BOND 14000
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant
UL listed in file E334038 (UL94V-0)
Non corrosive
Non slumping paste
Easily dispensed
Color:
Black
SILSO BOND 13621
Silicone Adhesives
Features:
1 Part Low Corrosive Industrial Sealant
Excellent flow and self levelling properties
Low corrosion
Good adhesion to substrates
Color:
Translucent
SILSO BOND 13620
Silicone Adhesives
Features:
1 Part Low Corrosive Industrial Sealant
Excellent flow and self levelling properties
Low corrosion
Good adhesion to substrates
Color:
Translucent
SILSO BOND 13604
Silicone Adhesives
Features:
1 Part Low Corrosive Industrial Sealant
Resistant to fuels
Low corrosive
Good adhesion to many substrates
Color:
Matt Black
Silcoset 152
Silicone Adhesives
Features:
1 Part Adhesive Sealant
Aerospace approved MSRR 9146
Flexible from -60°C/-76°F to +300°C/572°F
Excellent adhesion to many substrates
Non slumping paste
Color:
White
SILSO BOND 13560
Silicone Adhesives
Features:
1 Part General Purpose Sealant
Good adhesion to many substrates
Complies with BS5889 type A
US Federal TT-S-001543A class A
Germany DIN 18540
Color:
Translucent
SILSO BOND 13603
Silicone Adhesives
Features:
1 Part Low Corrosive Industrial Sealant
Thixotropic paste
Low corrosive
Primerless adhesion to many substrates
Low Odour
Color:
Translucent
Silcoset 158
Silicone Adhesives
Features:
1 Part Adhesive Sealant
Aerospace approved Rolls Royce MSRR 9146
Flexible from -60°C/-76°F to +300°C/572°F
Excellent adhesion to many substrates
Non slumping paste
Color:
Black
Silcoset 153
Silicone Adhesives
Features:
1 Part Adhesive Sealant
UL recognised in file no. E334038
Aerospace approved Rolls Royce MSRR 9410
Flexible from -60°C/-76°F to +250°C/482°F
Excellent adhesion to many substrates
Color:
Translucent
Silcoset 151
Silicone Adhesives
Features:
1 Part Adhesive Sealant
Aerospace approved MSRR 9085
Flexible from -60°C/-76°F to +300°C/572°F
FDA CFR 177,2600 for aqueous and fatty foods
EC 1935/2004 framework EN 1186-1 / EN1186-3 compliance
Color:
White
AS5702
Silicone Adhesives
Features:
1 Part General Purpose Sealant
Non corrosive
Excellent adhesion to most substrates
Suitable for polycarbonate and acrylic
Non slumping paste
Color:
Translucent
AS1821
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant and Potting Material (Electronic Grade)
Fast room temperature cure
Non corrosive
Low linear shrinkage
Self levelling
Color:
Black
AS5700
Silicone Adhesives
Features:
1 Part General Purpose Sealant
Non corrosive
Excellent adhesion to most substrates
Suitable for polycarbonate and acrylic
Non slumping paste
Color:
White
AS1811
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
UL94 V0 recognised in file no. E334038
Thermally conductive
Non corrosive
Low volatile content
Color:
White
AS2500
Silicone Adhesives
Features:
2 Part Industrial Adhesive Sealant
Very fast room temperature cure
Good adhesion to most substrates
Anaerobic cure
Reduced odour
Color:
Black
AS1803
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
UL recognised in file no. E334038
Good thermal conductivity
Non corrosive
Fast skinning
Color:
White
AS1745T
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
MIL 46146B physical / chemical requirements
High mechanical strength
Contains UV tracer for visual inspection
Non slumping adhesive paste
Color:
Translucent
AS1802
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
Excellent thermal conductivity
Non corrosive
Fast skinning
Low linear shrinkage
Color:
Grey
AS1723
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant and Potting Material (Electronic Grade)
Self levelling
Low odour
Non corrosive
Suitable for sensitive substrates
Color:
Translucent
AS1745G
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
MIL 46146B physical / chemical requirements
High mechanical strength
High temperature resistance
Non slumping adhesive paste
Color:
Grey
AS1740
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant, Coating and Potting Material (Electronic Grade)
MIL 46146B physical / chemical requirements
UL recognised in file No. E334038
Contains UV tracer for visual inspection
Self levelling, adhesive liquid
Color:
Translucent
AS1701
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
Non corrosive
Excellent adhesion to most substrates
Fast skinning
Non slumping paste
Color:
Black
AS1707
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
Thermally conductive
Non corrosive for sensitive substrates
Low thermal outgassing (ECSS-Q-ST-70-02C)
UL94 V0 recognised in file no. E334038
Color:
Grey
AS1700
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant and Coating (Electronic Grade)
Non corrosive
Excellent adhesion to most substrates
Excellent dielectric and isolating properties
Low Odour
Color:
Translucent
AS1420
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant and Potting Material (Electronic Grade)
Fast heat cure
Excellent thermal conductivity
Non corrosive
Tough protective rubber
Color:
Grey
AS1525
Silicone Adhesives
Features:
1 Part Industrial Adhesive Sealant
Fast room temperature cure
Controlled through to prevent strike through on textiles
Excellent elongation
Color:
Translucent
AS1502
Silicone Adhesives
Features:
1 Part Industrial Adhesive Sealant
Fast curing at room temperature
FDA indirect food contact CFR 21 177,2600
EU overall migration EC 1935/2004 framework EN1186-1 and EN1186-3
Silver grey in colour
Color:
Silver Grey
AS1421
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant and Potting Material (Electronic Grade)
UL94 V0 recognised in file no. E334038
Excellent thermal conductivity
Fast heat cure
Adhesion to most substrates
Color:
Grey
AS1504
Silicone Adhesives
Features:
1 Part Industrial Adhesive Sealant
Flexible from -50°C/122°F to +300°C/572°F
Good electrical insulation properties
Excellent adhesion to most substrates
Color:
Red
AS1402
Silicone Adhesives
Features:
1 Part Non-Corrosive Neutral Cure Adhesive Sealant (Electronic Grade)
Fast heat cure
Good adhesion to most substrates
Non slumping paste
Translucent
Color:
Translucent
.png){kind=icon}