Silicone and Acrylic Protective Coating

 

Being the electronics partner for ACC in the UK allows us to offer competitive pricing on a vast range of conformal and protective coatings.

A conformal coating, Silicone or Acrylic is normally applied as a thin layer across the surface of the board, covering all components and delicate wiring.

Protecting the PCB board in critical applications which are exposed to harsh environmental working conditions is essential if product failure is to be avoided.

For any coating to be effective it must maintain good adhesion to all the component substrates, be unaffected by changes in operational temperature and be resistant to any contaminants, such as moisture and chemicals.

Its ability to flow around, under and over the components without leaving areas exposed to the atmosphere especially on sharp edges, is also important.

ACC Conformal Coatings
  • ACC11 Conformal Coating
    is an air drying coating with a viscosity of 250 mPas
  • ACC15 Conformal Coating
    is a room temperature cure coating with a viscosity of 1180 mPas
  • ACC16 Conformal Coating
    is a room temperature cure coating with a viscosity of 500 mPas

  • ACC17 Conformal Coating
    is a 100% low volatile silicone coating with a very low viscosity 400 mPas
  • ACC31 Thinner Thinners
    for ACC 11 acrylic conformal coating
  • ACC34 Thinner Low viscosity fluid
    for thinning 1 part RTV’s
  • ACC34UV Thinner Low viscosity fluid
    for thinning 1 part RTV’s with UV trace
ACC Silicone Encapsulants
  • QLE1102 2
    Part silicone encapsulant optically clear
  • QSil12 20:1
    Condensation cure silicone encapsulant clear
  • QSil216 10:1
    Addition cure silicone encapasulant optically clear
  • QSil218 10:1
    Addition cure silicone encapasulant optically clear
  • QSil222 10:1
    Addition cure silicone encapasulant optically clear
  • QSil229 1:1
    Addition cure silicone encapasulant optically clear
  • QSil430
    2 Part Addition cure silicone encapasulant flame retardant
  • QSil550
    2 Part Addition cure silicone encapasulant
  • QSil553 SILCOTHERM
    2 Part Addition cure silicone encapasulant
  • QSil556
    2 Part Addition cure silicone encapasulant
  • QSil573 SILCOTHERM
    2 Part Addition cure silicone encapasulant
  • SE2003 SILCOTHERM
    2 Part Addition cure silicone encapasulant
  • SE2005
    2 Part Addition cure silicone encapasulant
  • SE2010 SILCOTHERM
    2 Part silicone gap filler
  • SE2020 SILCOTHERM
    2 Part silicone gap filler
  • SE2021 SILCOTHERM
    2 Part silicone gap filler
  • Silcoset 101
    2 Part condensation cure silicione encapsulant high temperature
  • Silcoset 105
    2 Part condensation cure silicione encapsulant